Find Valtek 3ohm Injector Type 30/33/37/40 Coil, Tomasetto Rail Injecotrs Accessories Solenoid Coil, Omb Cng Lg1 Rail Injector Coil on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
Home > Products > Car Socket Series > 3 Ohms Solenoid Coil For OMB Injector Rail
The Latest Product Alerts Send Me
3 Ohms Solenoid Coil For OMB Injector Rail
Payment Type: L/C,T/T,Paypal,Money Gram,Western Union
Terms of Trade: FOB,CFR,CIF,EXW
Min. Order: 1 Piece/Pieces
Delivery Time: About 7 Days
Packaging: Plastic bag, Box, Carton, Pallet
Productivity: 300000 pcs per month
Brand: Brando
Transportation: Ocean,Land,Air
Place of Origin: Ningbo China
Supply Ability: 70000 pcs per week
Certificate: CE
Port: Ningbo,Guangzhou,Shanghai
Basic Info

Model No.: BB09325013

Product Description

OMB lg1 Injector Rail Solenoid Coil 3 Ohms

The 3 Ohms Solenoid Coil For OMB / Valtek / Tomasetto Injector Rail is made of thermoplastic composite material or flame retardant heat-resistant resin. Excellent resistance to high temperature and moisture. Widely used in car dual fuel CNG refit system, gas common rail, motorcycle device. Commonly used voltage resistance DC12V / 3 Ω / 6 Ω / 8 Ω.

Working principle of spraying rail:

1. The gas is stored in the guide rail and sprayed through the nozzle to the engine inlet pipe.

2. Computer controlled nozzle injection. 3 or 4 nozzles are installed on the guide rail to suit different models.

3. The temperature and pressure of the gas entering the guide rail can be monitored. The maximum operating pressure is 300Kpa.

4. When the electromagnetic coil of the spray rail is energized, the suction will be generated, the needle valve will be sucked up, and the nozzle hole will be opened. The gas will be ejected at a high speed through the annular gap between the shaft needle and the nozzle at the head of the needle valve, forming a fog, which is conducive to full combustion.

Technical data of 3 Ohms Solenoid Coil For OMB Injector Rail:

Model number BB09325013
Reference number 3ohm injector type 30 / 33 / 37 / 40, 3ohms IR3045 / IR3020 / IR3087
Normal voltage DC12V (±10%, other can be customized)
Normal resistance 3 ohms
Normal power DC:48Watt
Material Plastic, Brass
Wire class H
Connection DEUTCH
Application OMB / Valtek / Tomasetto Type CNG Injector Rail and On / Off shut-off Solenoid Valve
Hole diameter 9 mm
Height 29.2 mm
Width 25 mm

Overall dimension of Valtek 3ohm Injector Type 30 / 33 / 37 / 40 Coils:

Overall dimension of Valtek 3ohm Injector Type 30 / 33 / 37 / 40 Coils

Detail enlargement of Tomasetto Rail Injecotrs Accessories Solenoid Coil:

Detail enlargement of Tomasetto Rail Injecotrs Accessories Solenoid CoilDetail enlargement of Tomasetto Rail Injecotrs Accessories Solenoid Coil

Applied in CNG Injector Rail and On / Off shut-off Solenoid Valve:

Production display of Omb Cng lg1 Rail Injector Coil:

Question 1: Is there an electromagnetic coil for the automotive industry?
Answer: Yes, we do the solenoid valve coils of the automotive industry, including car engines, car gearboxes, car exhaust, car suspension systems and automotive ABS anti-Lock systems.

Question 2: How to choose a suitable solenoid valve coil?
Answer: Users can provide us with a series of solenoid valve coil data, such as solenoid valve coil pressure, solenoid valve body material, interface size and media, etc. We will recommend suitable products for customers.

Note on the use of solenoid valve coil:
1. When the coil is energized, it is strictly forbidden to cover to prevent overheating and burning;

2. Electromagnetic coils, sockets, electromagnets and connecting parts are strictly prohibited from hitting the collision to avoid damage;

3. When the coil is energized for normal operation, due to its own heat, the temperature is high, please do not touch it;

4. The working pressure, temperature and viscosity of the medium shall not exceed the specified range;

5. The actual power supply voltage must not exceed the specified range;

6. Ordinary solenoid valve coils should not be used in explosive places;

7. The internal parts of the solenoid valve and the filtering device must be cleaned regularly;

8. Check the model and parameters on the valve label, which must meet the technical requirements of the site;

9. Check the coil, electromagnet and electrical socket to ensure no external damage;

10. When the solenoid valve coil is not used for a while, it can be stored in the room where 0 °C - 40 °C, relative humidity <80%, and no corrosive gas, no open storage is allowed;

11. When the electromagnetic valve is installed in the open air, a protective cover must be installed to ensure performance and extend the service life;

12. The AC solenoid valve coil must not be energized at no load, otherwise there is a danger of burning;

13. The best installation method of the solenoid valve is perpendicular to the horizontal pipe, the coil is upward, and the maximum inclination angle is <30° during installation. Otherwise, normal use cannot be guaranteed;

14. Clean and purify the pipeline. The working medium of the solenoid valve should be clean. If the medium contains particulate impurities, a filter device must be installed on the pipeline before the valve.

15. Connect the valve's interface to the pipe according to the direction indicated by the arrow on the valve body, and ensure that the joint is well sealed.

Welcome to your any question and inquiry!



BRANDO is one of leading manufacturers of solenoids, armature assembly, and solenoid valve in China, located in China main sea port city -- NINGBO, the location with high convenience of shipment not only by air but also by ocean.


BRANDO has 4800 square meter workshops and around 50 employees, developed about 10 years from year 2008 by focusing on products quality, design, service, now with good reputation from all over the world and our annual output value increasing yearly by yearly, moreover, more than 90% of annual output value is from exporting brought from our high quality and best customer service. We highly believe to run the company and brand well should keep faith of BEST QUALITY, BEST ATTITUDE, and BEST CUSTOMER SERVICE.


BRANDO`s products range covering solenoid coil, solenoid valve armature assembly, various solenoid valves, fluid medium such like pneumatic, hydraulic, water, hot water, air, steam, gas, oil, chemical liquid and Others. We supply OEM and ODM, all products widely applications for automotive, automation, textile industry, pneumatic , hydraulic, air and water treatment systems and so on.
Model series have such like Q22HD, 2W, 2S, US, 2L, 223, 6014, 0311, 0927, 0955, PU220, PU225, 2P, 2V, VX2120, QX, VX22, VX31/32/33, ZQDF, SCG, CA, DMF, 4V100, 4V200, 4V300, 4V400, VF, VZ, EVR, etc... Any request just feel free to contact our sales team, will response once get message, email or calling.
BRANDO company is approved by ISO9001:2008 system and managed by 5S management, with clean workshop environment and high precision machines and strict operation paperwork procedure to ensure the production well, save delivery time, and reduce any waste to satisfy all clients all over the world.

BRANDO company welcome clients from all over the world, we attend exhibition in many countries, such like America, Europe, Australia, Malaysia, Pakistan, Egypt, New Zealand, Poland, Germany, Korea, India, Indonesia, etc. We highly welcome your visit at our booth or our company.


Quick review of BRANDO products:



pulse valve

armature and coils

Company Info
  • Representative: Lu Jin Jun
  • Product/Service: Solenoid Valve Armatures , Solenoid Valve Coils , Pneumatic Solenoid Valves , Pneumatic Cylinders , Pulse Jet Diaphragm Valves , Pneumatic Components
  • Capital (Million US $): 1000,000RMB
  • Year Established: 2008
  • Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
  • Export Percentage: 81% - 90%
  • Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
  • No. of Production Lines: 10
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 11 -20 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 3,000-5,000 square meters
  • Factory Location: Ningbo
  • Contact Person: Mr. Brandon Bao
  • Tel: 86-0574-83879820
Email to this supplier
Your message must be between 20-8000 characters